Here’s the answer.

No, the Flameblazer 5-Way fires one flame at a time. Since the nozzles are fixed rather than moving, this actually makes it the fastest responding option for creating flame effects that move rapidly from side to side.

Yes, using various nozzles. The unit comes standard with an L nozzle, generating a 10 meter flame in neutral conditions. We also offer an S nozzle (6 meter flame) and an M nozzle (8 meter flame) as accessories.

Yes, using various nozzles. The unit comes standard with an L nozzle, generating a 10 m flame in neutral conditions. We also offer an S nozzle (6 m flame) and an M nozzle (8 m flame) as accessories.

The flame height can is determined by which mode you use, which can be set in the menu. Aerosol mode is used when you use a gas cannister and creates a 3 m flame. Gas bottle mode uses a gas bottle and creates a 4 meter flame. Big flame mode uses both the aerosol and gas bottle, which creates a 6 m flame

Yes, this is possible. You can block output nozzles through the menu, and the unit also comes with blanking nozzles that can be placed in the machine to be absolutely certain nothing comes out of it.

Yes! The Flameblazer can be tilted to an angle of 45 degrees in all upward positions.

Yes, each nozzle can be triggered individually.

No, colored fluids cannot be used in the Flameblazer. This is due to the high risks these fluids carry (they are highly toxic and dangerous to people), as well as the chemicals involved, which cause the internal components to deteriorate rapidly.

No, colored fluids cannot be used in the Flameblazer 5-Way. This is due to the high risks these fluids carry (they are highly toxic and dangerous to people), as well as the chemicals involved, which cause the internal components to deteriorate rapidly.

Flame machines are listed as professional products. Meaning these machines can only be ordered by professional companies who know how to install and use flame systems safely. If you are interested in getting a training how you could use flame machines safely, please feel free to contact us to discuss the possibilities.

Yes! The Flameblazer 5-Way is designed to be weatherproof, so you can use it indoors and outdoors at any event.

The Flameblazer is designed to be weatherproof, meaning you can use it in and outdoor at an event environment.

The Stage Flame is not designed to be waterproof, so outdoor use should be limited to dry conditions.

The difference is noticeable in the character of the flame. A gas flame produces a fireball when pulsed briefly, and burns low when kept activated continuously — rising slowly due to its lower pressure. A liquid flame responds faster: under high pressure, it shoots out of the machine, creating an impressive column flame that reaches great heights.

The Flameblazer has one output nozzle that shoots vertically. The Flameblazer 5-Way has five output nozzles, each firing independently at an angle.

Fuel consumption depends on the nozzle used:
• L nozzle: 50 mL/s
• M nozzle: 30 mL/s
• S nozzle: 12 mL/s

Fuel consumption depends on the nozzle used:
• L nozzle: 50 mL/s
• M nozzle: 30 mL/s
• S nozzle: 12 mL/s

The safety distance depends on the nozzle used. Maintain a free cylindrical output zone from each output of the Flameblazer:
- S nozzle: radius 1.5 m, height 9 m
- M nozzle: radius 2.0 m, height 12 m
- L nozzle: radius 2.5 m, height 15 m

The safety distance depends on the nozzle used. Maintain a free cylindrical output zone from each output of the Flameblazer 5-Way:
• S nozzle: radius 1.5 m, height 9 m
• M nozzle: radius 2.0 m, height 12 m
• L nozzle: radius 2.5 m, height 15 m

Maintain a distance of 3 meters around the unit. Also ensure a free clearance zone in flame height of 6 meters when using an aerosol canister, 7 meters when using a gas bottle, and 10 meters when using Big Flame mode.

The Stage Flame works with propane gas out of a regular gas bottle or with propane cannisters.

The Flameblazer 5-Way runs on either Isopropanol alcohol (99% pure) or ISOPAR G, H, or L.

For optimal safety for your crew, artists, and crowd, you can integrate the Arm Controller and arm system into your setup. To combine DMX and ARM over a single cable, use the DMX over ARM injector. If you prefer to use your own safety system, the Arm Override on the unit makes this possible. Other available accessories are the S and M nozzle, a nozzle exchange tool, and a Flightcase that holds two units.

For optimal safety for your crew, artists, and crowd, you can integrate the Arm Controller and arm system into your setup. To combine DMX and ARM over a single cable, use the DMX over ARM injector. If you prefer to use your own safety system, the Arm Override on the unit makes this possible. Other available accessories are the S and M nozzle, a nozzle exchange tool, and the Flightcase that holds one unit, with additional room for all your nozzles, cables, and exchange tool.

If you plan to use a gas bottle, we recommend using our own gas hose and gas reducer. For countries outside the Netherlands, we offer Gas Adapter Sets, which ensure the gas reducer always fits your local gas bottle.

Yes! The Smokejet can be positioned at any angle, giving you flexible installation options. When mounting it upside down on a truss, make sure the canister stays upright to prevent fluid leakage and ensure proper operation.

The noise level of the CO2 Jet I cannot be reduced. For the CO2jet II, however, noise can be significantly reduced by using the Low Noise Nozzle in combination with the Extended Tube — lowering the sound level from approximately 115 dB(A) to 95 dB(A).

Yes! Noise can be significantly reduced by using the Low Noise Nozzle in combination with the Extended Tube, lowering the sound level from approximately 115 dB(A) to just 95 dB(A).

Yes! Our 1 m (MFX1805) and 2 m (MFX1806) extension hoses let you increase the distance between canister and machine for extra setup flexibility, up to a maximum of 2.5 m. Tip: always prime the Eco2jet before use when running an extension hose, to keep performance optimal.

Yes! With the Eco2jet Bracket (MFX1802), you can position the machine in any direction for full 360 degrees operation. Use it as a floor stand for angled output, or mount it to a truss for maximum installation flexibility.

Much quieter! A traditional CO2jet can reach up to 115 dB, while the Eco2jet tops out at just 95 dB. A welcome relief for DJs, artists and stage crew.

Fold the t-shirt tightly and secure it with tape or elastic bands.

The Eco2jet delivers the same dense white plumes and high-impact visual effect as traditional CO2 systems, but stays unaffected by humidity, so your output is always consistent!

A CO2gun II consumes approximately 0.5 kg of CO2 per second. The number of cylinders you need depends on how many CO2gun II units you're using and the total effect time required. Not sure how much CO2 you need? Our product specialists are happy to help you calculate the right amount.

A CO2jet II consumes approximately 0.5 kg of CO2 per second. The number of cylinders you need depends on how many CO2jet II units you're using and the total effect time required. Not sure how much CO2 you need? Our product specialists are happy to help you calculate the right amount.

A CO2pistol consumes approximately 0.35 kg of CO2 per second. The number of cylinders you need depends on how many CO2pistol units you're using and the total effect time required. Not sure how much CO2 you need? Our product specialists are happy to help you calculate the right amount.

A CO2 Jet I consumes approximately 0.5 kg of CO2 per second. The number of cylinders you need depends on how many CO2jet I units you're using and the total effect time required. Not sure how much CO2 you need? Our product specialists are happy to help you calculate the right amount.

Fast and efficient! With the CO2launcher Reload Tube, you can pre-fill with confetti, streamers, or items like t-shirts, and swap the tube in within seconds, so you're always ready for the next moment.

Yes. Using, storing, and transporting CO2 cylinders should always be handled by professional, trained companies in line with local regulations. Proper handling is essential, as CO2 cylinders can pose serious safety risks if not managed correctly.

Absolutely, the Eco2jet is built to perform indoors and outdoors alike.

The Smokejet is suitable for indoor use and dry outdoor environments.

It's all about heat-up time and power consumption. In ECO mode (1.5 kW), the machine heats up in around 18 minutes; in FULL power mode (3.5 kW), that's cut to just 9 minutes. The output itself is identical in both modes.

Both jets produce a powerful CO2 effect. The CO2jet II is the upgraded version, featuring a more robust housing and an easy plunger system that allows you to quickly adjust the output direction. It also uses a PowerCON TRUE1 connection, instead of the Neutrik PowerCON connection used on the CO2 Jet I.

The CO2gun II delivers a more powerful effect with an output of up to 8 meters, consuming approximately 0.5 kg of CO2 per second. The CO2pistol has an output of up to 6 meters and consumes approximately 0.35 kg of CO2 per second. Its compact design allows for easy one-handed operation, offering greater flexibility during use.

To connect and operate a CO2gun II, you need a high-pressure CO2 hose and a bottle-to-hose connector to connect the CO2 cylinder to the hose. Not sure which accessories you need? Our product specialists are happy to help you choose the right setup.

To connect and operate a CO2 Jet I, you need a high-pressure CO2 hose and a bottle-to-hose connector to connect the CO2 cylinder to the hose. You'll also need a PowerCON cable to power the CO2jet I. Not sure which accessories you need? Our product specialists are happy to help you choose the right setup.

To connect and operate a CO2jet II, you need a high-pressure CO₂ hose and a bottle-to-hose connector to connect the CO2 cylinder to the hose. You'll also need a PowerCON TRUE1 cable to power the CO2jet II. Not sure which accessories you need? Our product specialists are happy to help you choose the right setup.

To operate a CO2launcher, you need a high-pressure CO₂ hose in combination with a bottle-to-hose connector. For confetti and streamers, we also recommend our Lifting Cores (MFX1172) and Cap Stickers (MFX1173). Not sure which setup is right for you? Our product specialists are happy to help.

To connect and operate a CO2pistol, you need a high-pressure CO2 hose and a bottle-to-hose connector to connect the CO2 cylinder to the hose. Not sure which accessories you need? Our product specialists are happy to help you choose the right setup.

A CO2 Backpack is suitable for a small 6 kg CO2 cylinder with a maximum of 15cm diameter. Longer straps are available for a cylinder with a diameter up to 21cm. You will need 2 straps.

Yes, the barrels can be controlled both individually and simultaneously. Each barrel can be assigned its own DMX address for separate control, or both barrels can be set to the same DMX address to trigger them at the same time!

The Stadiumshot is designed to use at large outdoor festivals and events or in stadiums. You can use it indoor but only for large indoor venues with a minimum height of 12m (for shooting confetti) and 25m for shooting streamers. Always check the output, which type of filling you need, and the safety distance in our user manual.

Yes, this is possible. However, to achieve the best performance, we recommend using Speedfills. They allow each barrel to be filled quickly and consistently to the maximum, which helps you get the most output from each shot and ensures a more powerful and even effect.

Yes, but always make sure to account for the safety distances in the shot direction. The Stadiumshot III is not designed for small indoor venues.

Yes, Speedfills can be shipped via express delivery! They are classified as NON-ADR goods, as the cartridges are made from 100% biodegradable carton and paper. This allows for easy worldwide shipping, including express services.

Yes! The Confettigun is equipped with three barrels that can be fired either separately or simultaneously. This lets you create multiple shots during a performance, or fire all barrels in sequence for a bigger effect.

Yes, the fan speed can be controlled via DMX. Depending on the fan speed and confetti load, the effect duration can be adjusted from approximately 1 to 10 minutes.

Yes! The Shotbase DMX allows electric cannons to be positioned at different angles, making it easy to direct the confetti or streamer effect exactly where you want it. It can be used on the floor or mounted on a truss, where it can also be installed at various angles.

Insert the Electric Cannons into the barrels and securely screw them into place. Switch on the Confettigun and check that the LED power indicator is illuminated, confirming the battery has sufficient charge. Make sure the safety pin is not in the safety position. Once everything is ready, aim the launcher in a safe direction and pull the trigger to launch the confetti or streamers.

Insert two fully charged 9V batteries into the DJ Shotgun and load the desired Electric Confetti or Streamer Cannon. Make sure the safety pin is not in the safety position and check that the LED indicator is green, confirming the DJ Shotgun is ready to fire. Point the DJ Shotgun in a safe direction and press the trigger to fire.

The Shotbase DMX is controlled and activated via DMX. Power the unit with powerCON, connect it to a DMX controller, set the correct DMX address, and use the assigned DMX channel to activate the connected outputs.

The Swirlfan II is designed for truss mounting and comes supplied with two Quick Trigger Clamps, letting you securely attach the unit to a truss, pipe, or other suitable rigging structure.

The Swirlfan II is controlled via DMX. By adjusting the DMX value, you control the fan speed and with it, the intensity and duration of the confetti effect.

You can activate the Stadiumshot II by either sending a direct voltage between 110 and 220 V to the unit, or you can use a pyro controller between 12 and 24 V.

The machine uses 0,5kg of CO2 per second. Meaning you can blow around 60 seconds with a 30kg CO2 bottle. If you like to blow confetti for a longer duration you can connect multiple CO2 bottles. Connect 2 bottles to the machine by using a CO2 Combiner or 4 bottles by using a Distribution block, 4x 3/8 in, 1x 3/8 out.

With a fully charged battery, the MAGIC FX Confettigun delivers approximately 1,000 single shots.

Pressure build-up takes approximately one minute per tank. For example, two tanks will require around two minutes to reach full pressure.

It takes approximately 8 hours to fully charge the battery of the Confettigun.

With two fully charged 9V batteries, you can fire up to 50 shots before the batteries need replacing.

Check the specifications of the confetti machine you like to use and check its consumption.

Yes, the Proshot is designed to perform in both indoor and outdoor use. The new MFXOS system is engineered for all weather conditions, ensuring reliable operation in various settings.

The Swirlfan II is designed for indoor use only. Outdoor use is not recommended, as wind and other environmental factors can significantly affect confetti distribution and overall performance.

Caps and cores help the effect reach further, while also protecting the barrel from weather conditions and unwanted objects being thrown or falling in.

The LED indicator shows the status of your DJ Shotgun. Green means it's ready to fire. Red means it's not ready to fire, or the batteries are low and need to be replaced.

Proshot units are designed to be safely stacked. Make sure they are aligned properly and placed on a stable surface. (MFX0442 - Proshot E-Track Strap and MFX0443 - Proshot E-Track D-Ring)

The Stadiumshot III is a all in one machine, which has a built-in compressor, is half the size of the StadiumShot II and 30 kg lighter, making it the perfect touring solution. It comes with a DMX interface which does not require any external Switchpacks whilst it still gives you the same effect as the original version.

The Stadiumshot III operates between 4 and 8 bar.

Caps and cores help the effect reach further, while also protecting the barrel from weather conditions and unwanted objects being thrown or falling in.

The Swirlfan II is compatible with MAGIC FX bio paper confetti, metallic pvc confetti, confetti shapes, and paper snow. It can handle confetti pieces up to approximately 55 mm (2 inches) in size, with a capacity of up to 2 kg of bio paper confetti or 3 kg of metallic pvc confetti.

For the Stadiumshot II, we offer a rain cover that helps protect it against the rain, spare barrels for quick refills, and a water barrel that shoots water up to 30 meters!

A Stadiumshot III strap secures the unit to its lid, and a rain cover protects it from heavy rain while also keeping it clean in dusty environments or when placed close to pyro. We also offer spare barrels for quick refills, and a water barrel that fits the unit, capable of shooting water more than 30 meters away.

First make a choice if you like to shoot confetti or blow confetti. If you shoot confetti you get a spectacular effect that the crowd will not expect. The confetti will fall down slowly which is an amazing effect. If you like to blow confetti, you can get a longer effect and create magical rain of confetti like for example 30-60 seconds or even longer if you like.

To shoot confetti you can choose for a Gun, a Powershot or a Stadiumshot.

To blow confetti with an electric blower you can chose for a Clubblower for small size venues or a Stadium blower for larger venues. Or chose for a Swirlfan which is a silent machine that spreads confetti from a truss. To blow confetti with CO2 (without electric power) you can chose for a Stadium blaster. CO2 is more powerful compared to electric blowers and there will be white CO2 smoke coming out of the machine.

! Always check the output of the machines and check if your area is big enough for the output of the machine. Check the user manuals of the product to see the exact output and safety distance. Or give us a call and we would be happy to give you the best advice.

No, the FX-Blower motor is not designed to be dimmed.

Yes The fan speed of a Stage Fan XL can continously sdjusted from 0% to 100% by using a DMX dimmerpack.

Simple and direct. The FX-Blower is operated right on the unit. Connect it to a power source using a Neutrik® powerCON TRUE1 cable, select your desired fan speed (Low, Medium, or High), and switch it on. For more control, the FX-Blower can also be activated via DMX when combined with the FX-Switchpack II.

The Stage Fan XL is powered via a PowerCON connection and controlled using the integrated 3-step speed selector.The Stage Fan XL can also be activated via DMX when used in combination with the FX-Switchpack II.

Stage Fan – 53 dB(A)*
Stage Fan XL – 65 dB(A)*
FX-Blower – 73 dB(A)*

*Measured from a distance of 7 m.

Yes! The FX-Blower features a built-in 3-position speed control, letting you select Low, Medium, or High to match your application.

Yes. The Stage Fan XL features a 3-position speed switch, allowing you to select low, medium, or high fan speed. For applications requiring more precise control, the fan speed can also be continuously adjusted from 0% to 100% by using a suitable DMX dimmerpack, enabling smooth speed control via a DMX console.

The FX Blower has a significant air output of 115m3 per minute.

The maximum airflow output of the Stage Fan XL is 8,450 m³ per hour. 

The FX-Blower produces the following sound levels at different distances:
1 m: 76 dB(A)
5 m: 73 dB(A)
10 m: 70 dB(A)

The Stage Fan XL creates 65 dB(A) when standing at a distance of 7 m.

Yes! Snow output level and density can be easily adjusted via the device menu or DMX control. Combine it with the FX Blower (MFX2402) to extend the output distance up to 25 meters!

Easy, using the included bracket! It attaches to the top of the machine, allowing you to mount a truss clamp such as the Twenty Clamp (MFX3103) using an M10 bolt, spring washer, and lock nut. This lets you securely install the Snowbox on a truss for flexible positioning.

The Snowcase is designed for outdoor use and use in well-ventilated indoor spaces.

Paper snow stays on the ground and needs to be cleaned after the show. Foam based will not stay on the ground for a long while and will evaporate. When it is cold outside it takes longer before it will evaporate. When it’s warm it evaporates faster.

There are two materials to create snow effects. Artificial (paper) snow or foam based snow made from special snow fluid. Paper snow can be used for decoration or used for a falling snow effect. We offer 2 types of paper snow. Small pieces of 10x10mm or crunched paper snowflakes. Both types are flameproof and can be blown in the air by using a Clubblower, Swirl Fan or Stadiumblower.

We also offer handheld shots and electric shots filled with paper snowflakes.
To create a realistic snow storm with foam based snow liquid you can use a Snowbox (5-8m) or Snowcase (15m). This snow fluid is made of a foam based liquid which is biodegradable and non-slippery.

The Snowbox creates a snow output distance of up to 7 m For applications requiring a longer throw distance, combine it with an FX-Blower (MFX2402) to extend the output distance up to 15 m!

The Sparxtar II tilts from -15° to 45° side-to-side, and up to 15°  forward, giving precise control over the spark angle on set.

No, you do not need any acces card to make use of the Sparxtar II.

The Sparxtar II is fully controllable via DMX, which ensures a reliable connection to activate and control the effect.

It is very important to always empty the hopper after use to maintain the lifespan of the machine. For instructions, please check out this video.

The Sparxtar II contains a 150-gram hopper that delivers up to 6 minutes of full effect output.

The Sparxtar II is designed for indoor and dry outdoor use.

The Sparxtar II is the next generation spark machine, that features a more compact and lightweight design. It also produces a more reliable and fuller spark effect with a rapid response time. Contact our sales team on sales@magicfx.com to receive more insights.

The Sparxtar II produces a voluminous spark effect up to 5 meters (16.4 ft) high and is adjustable in range from 2 - 5 meters.